DISTRIBUTOR SPAREPART MESIN PABRIK SAWIT DI DURI

Diresmikan sejak 1993, PT. KHARISMAPRATAMA ABADISEJATINDO akan menjadi penyuppli terkemuka untuk material handling dan juga Perlengkapan Pabrik Kelapa Sawit yang berkualitas. Selama bertahun-tahun, Perusahaan Kami telah berdedikasi untuk memecahkan permasalahan industri Usaha Kami didukung oleh teknisi penjualan PT. KHARISMAPRATAMA ABADISEJATINDO yang begitu terampil dan juga perwakilan layanan pelanggan terlatih yang memberikan bantuan teknis kepada pelanggan PT. KHARISMAPRATAMA ABADISEJATINDO, perusahaan Usaha Kami akan selalu berusaha untuk bersikap ramah, membantu, berpengetahuan luas, dan efisien. Kembali oleh prinsipal ISO terkemuka dari luar negeri. Usaha Kami telah mempertahankan tingkat pengetahuan tertinggi pada semua produk PT. KHARISMAPRATAMA ABADISEJATINDO.

 Distributor Sparepart Mesin Pabrik Sawit Di Duri

Kami punya tim administrasi & teknis yg amat kompeten untuk melayani Anda.

Produk Kami adalah sebagai berikut:

>>>   Screwpress

>>>   Digester

>>>   Separator/ Sludge Centrifuge

>>>   Nut Cracker / Ripple Mill

>>>   Vibrating Screen (Ayakan Getar)

>>>   Rotary Brush Strainer

>>>   Sand Cyclone

>>>   Bunch Crusher

>>>   Kipas & Pemanas

>>>   Rantai dan juga sprocket

>>>   Empty Bunch Press

>>>   Empty Bunch Shredder / Cutter

>>>   Mesin Pembalik Tandan juga Kosong untuk pembuatan kompos

>>>   Pemisah Udara (untuk Campuran Kacang, Batu & Retak)

>>>   Penganalisis Kehilangan Kelapa Sawit (Inframerah)

>>>   Boiler Pabrik Kelapa Sawit (Ketel Uap)

>>>   Turbin Uap Pabrik Kelapa Sawit (Turbin Uap)

>>>   Crane and hoist (Palm Oil Crane , Gantry Crane, Overhead Travelling Crane, Pillar/Slewing Jib Crane, Goods Hoist, Wirerope Hoist, Chain Hoist)

>>>   Transfer Carriage

>>>   Tippler

>>>   Sparepart untuk Crane / Hoist (misalnya: C-Track dan juga aksesorinya, Kabel datar dan juga drum penggulung kabel, Joystick serta liontin tombol Push, Inverter dan kontaktor, bantalan, rem, Wirerope untuk kerekan, gearbox, motor, kipas, drum tali, pemandu tali, tali pengikat , penjepit tali, poros, roda gigi, kopling, sakelar batas, dll)

>>>   Sparepart Pabrik Kelapa Sawit (misal: wormrew (Segmented), press cage, drive shaft, cone guide, oil seal, tie rod, bush, spacer, collar, Long Arm/Short Arm Digester, Worn Lengthening Shaft, Expeller Arm, Drive shaft, spur gear, Link Chain untuk Continuous Sterilizer, Shackle-Scrapper Bar-Sprocket H19 & Hub untuk Continuous Sterilizer, dll)

>>>   batang rotor / batang rotor, Stator/Rotor Harden Rod untuk Ripple Mill / Nut Cracker

>>>   nozzle, nozzle hodler, Gland Nut/packing, utk centrifuge (Tungsten Durat, Hexoloy, etc)

>>>   re-meshing vibrating screen (20 inch, 30 inch, 40 inch)

>>>   door packing/ karet pintu rebusan (semua ukuran) bahan EPDM, BUNA, etc

>>>   repair/ rekondisi pintu rebusan (2100mm, 2700mm, 2800mm, 3200mm)

Untuk Layanan Purna Jual, perusahaan Perusahaan Kami menyediakan:

>>>   Penjualan dan juga Konsultasi Teknis

>>>   Layanan juga suku cadang ready stock

>>>   Layanan Kontrak (Crane DEMAG, KONE, SWF Kractechnik, dll)

>>>   Refurbishment

Distributor Sparepart Mesin Pabrik Sawit Di Duri

Untuk informasi lebih lanjut silahkan cek: https://linktr.ee/mesinsawitpks

PT. KHARISMAPRATAMA ABADISEJATINDO ( Mitra Pabrik Kelapa Sawit Anda pada tahun 1993)

Produk Supply Kami :

1. Steam Turbin ( Shinko) & Boiler

2. Screwpress, Digester, Sludge Centrifuge, Bunch Crusher, Ripple Mill/Nut Cracker, Rotary Brush Strainer, Tippler, Sand Cyclone, Rotary Brush Strainer, Hydrocyclone, CS-Continuous Sterilizer( CB Modipalm-Palmiteco)

3. Vertical Sterilizer ( Sawipac)

4. Pintu Sterilizer ( Univessel)

5. Hoist and Crane ( DEMAG & SWF KRANTECHNIK)

6. Vibrating Screen ( Sweco)

7. Fan & Heater

8. Chain & Sprocket

9 OIL loss Analyzer ( Foss NIR)

10. EFB Shredder & EFB Press = Pencacah Tandan Kosong Sawit & Press Tankos ( MUARBAN LEE)

11. Mesin Press Kernel Sawit / Kernel Crushing KCP ( Muarban Lee)

12. BIOGAS ( Muarban Lee )

13. Air Separator ( Sawipac)

14. PELLET MILL / PELLETIZING (Kayu / Tandan Kosong)

15. Water Treatment Plant (WTP), Waste Water Treatment Plant (WWTP), Reverse Osmosis (RO) System

16. Sparepart Mesin Pabrik Sawit

LAYANAN PURNA JUAL:

>>>   Ready stock suku cadang (sekrup cacing, sangkar tekan, pintu sterilisasi, pengepakan, pintu sterilisasi perbaikan/rekondisi, layar getar re-meshing (20,30,40), nozzle untuk centrifuge, batang rotor, riak plat, travel wheel crane, flat cable, S1A Track/C-Track, dll)

>>>   Kontrak Pemeliharaan (crane, sludge centrifuge, dll)

>>>   Modernisasi

>>>   Layanan panggilan & Inspeksi

>>>   Konsultasi Teknis

konsultasi dan pemesanan hubungi

62 813-6114-1950

Untuk Keterangan Lebih Lanjut dapat menghubungi: PT. KHARISMAPRATAMA ABADISEJATINDO Medan: 061-8469822 /8469806 /081264687412 E-mail: sales.medan@kharisma-sawit.com / sparepart.medan@kharisma-sawit.com

Jakarta: 021-6332821/ 082110867733 E-mail: sales.jakarta@kharisma-sawit.com /sparepart.jakarta@kharisma-sawit.com

Website: https://www.kharisma-sawit.com/ Linktree: https://linktr.ee/mesinsawitpks

Find us also in: 1. Instagram: https://instagram.com/mesinsawitpks/ 2. Facebook: https://www.facebook.com/mesinsawit/ 3. Youtube: https://m.youtube.com/user/mesinsawit/videos 4. Twitter: http://twitter.com/#!/kharisma_sawit 5. Linkedin: https://www.linkedin.com/in/pt-kharismapratama-abadisejatindo-mesin-pabrik-sawit-b4923546/ 6. Tumblr: http://mesinsawit.tumblr.com/

Distributor Sparepart Mesin Pabrik Sawit Di Duri

Sawipac Air Separator

Advantages & Benefits :

- Compact Design & Simpler Construction

- Easy Installation

- Improved Separation

- Saving of Building Space

- Lower Capital Cost

- 30% Power Saving

- Low Maintenance Cost

- Automation

Modules :

- Fibre / Nut Separation

- Nut / Stone Separation

- Cracked Mixture Separation

BIOGAS

PTT biogas system based on USR fermentation technology with our exclusive improvements and modifications, in order to cater to the Palm oil mill waste water to achieve the best unique fermentation process. At the same time, the matching process is tailored to achieve a complete biogas engineering system. The system using reinforced concrete-steel structure, enameled assembly material with service life time more than 30 years.

General Information :

Capacity                                            : 15 - 30 tons per hour

BOD & COD                                      : 60% - 70% Removal

Suspended Solid Recovery           : 60% - 80%

Sludge Moisture                              : 70% - 80%

DIGESTER

CB Vertical Digester is bestmatch to work togetherwith CB Screw Press. Built-in slow speed stirrer with cast steel arm will digest the fruit and hence break the oil cell mesocarp from the fruit before feed into the screw press.

Screw Press

CB Screw Press is designed and developed to extract palm oil from palm oil fruits. It minimizes the broken nut level to enhance kernel recovery. The Screw Press has been widely and sucessfully used in Malaysia and Indonesia.

Empty Fruit Bunch Press

Empty Fruit Bunch (EFB) is the bio-mass of palm oil milling process. The management of this waste is a major concern for palm oil millers due to the volume and cost involved. To overcome this problem, MBL has developed an efficient EFB processing technology which can be easily integrated into existing palm oil mill facilities.

General Information :

- Squeezes out the remaining oil

- Further reduces the moisture content of EFB

- 6 metric tons per hours

- Breaks & shreds EFB into discrete pieces of short fibre

- Triple reduction helical gear

- 100 hp (75Kw) or 125hp (90 Kw)

Empty Fruit Bunch Shredder 

Empty Fruit Bunch Shredder (as known as Break Cutter cum Oil Extractor or Size Reduction Break Cutter) is a compact and heavy duty processing machine specially designed to handle Empty Fruit Bunch (EFB).

The EFB Shredder combines the three step in processing Empty Fruit Bunch (EFB) namely breaking, squeezing, and cutting into one machine. Empty Fruit Bunch is fiberised and shredded into short fibre in discrete pieces.

General Information :

- Squeezes out the remaining oil

- Further reduces the moisture content of EFB

- 6 metric tons per hours

- Breaks & shreds EFB into discrete pieces of short fibre

- Triple reduction helical gear

- 100 hp (75Kw) or 125hp (90 Kw)    

Kernel Press

The palm kernel oil expellers are designed with the main shaft directly driven by a coupling affixed to the gearbox. Thus, it has a simple structure by eliminating the need of an extra gear set. This EK series design of palm kernel oil expeller has improved maintainability and reduces maintenance costs and time.

Performance :

After 1st pressing            : 12% to 14% oil content remain in cake

After 2nd pressing           : Less than 7% oil content remain in cake

Model :

- EK-100-K                          Capacity : 10 tons per 24 hours

- EK-150-K                          Capacity : 15 tons per 24 hours

- EK-200-K                          Capacity : 20 tons per 24 hours

- EK-300-K                          Capacity : 30 tons per 24 hours

FOSS Nir DA 1650

Laboratorium Analyser PKS dan KCP Hasil Analisa < 1 menit

- Screw Press Fibre          (oil loss, moisture)

- EFB Press Fibre              (oil loss, moisture)

- Sludge                             (oil content, moisture)

- Condensate                    (oil content, moisture)

- CPO                                  (FFA, Moisture, DOBI, IV)

- Palm Kernel                    (oil content, moisture)

- Palm Kernel Cake          (oil content, moisture)

- Mesokarp                        (oil content, moisture)

Foss NIRS DS 2500

Foss NIRS DS 2500 is a 2 in 1 instrument for Oil Loss Monitoring and also capable for analysis of soil /  fertilizer / leaf samples on below parameter:

Hydro cyclone

Hydro cyclone in Palm Oil Mill are use to recover kernel from the cracked mixture, it further separated the remaining fine kernels from the shell. The working principle of the cyclone is by utilizes fluid pressure energy to create rotational fluid motion. A rotational motion is  created by which the heavy shell particles are thrown outwards the walss by the centrifugal force, the shell particles which have reached the walls, discharges through the apex of the bottom cone discharge outlet. Simultaneously the light kernel particles are concentrating in the center axis of the cyclone; it will flow out from the top of the cyclone disharge outlet.

Ripple Mill

CB Ripple Mill / CB King Cracker is used to crack the nut in kernel recovery station. The revolutionary design of CB 6T King Cracker increases the cracking efficiency adn the result achieve consistently. The Simplicity and efficiency of the design reduce the maintenance cost and easier to maintain.

Rotary Brush Strainer

CB Rotary Brush Strainer is specially for continuous removal of coarse particles from process liquids in order to protect downstream equipment such as sludge centrifuges pumps etc. The strainer has a    stainless steel casing surrounding and vertical perforated cylinder through which the liquid passes.

Empty Fruit Bunch Press (2in1)

Model                                 :SE/SSCP 50

Moisture content             : 40% to 45% Capasitas                           : 8-10 Ton /Hour (fresh EFB) Motor                                 : 100 Hp + 3Hp (75kW + 2,2kW) Fiber Size                           : 70% below 4” | 30% between 1” - 6”

Costomer benefit             : save power /  save space /  investement cost

Sludge Centrifuge

CB Sludge Centrifuge is used to retrieve the oil palm from the sludge water after it clarified from the clarifying plant.

Steam Turbine

Shinko Steam Turbine RB Model Shinko Steam turbines are  specially designed, manufactured and tested in Japan since 1956.

The turbines are widely used in Palm Oil Mill, power plants, paper mills, sugar factories, fertilizer factories, petrochemical  industries, and marine industries. Assembly and testing facility expanded to Malaysia.

Feature and Benefits :

- Vertical Throttle and Trip Valve

- Labyrinth Packing and Steam Ejector

- Over hung Design and Axial Movement Sensor

- Maintenance Free Flexi Disc Coupling

- Speed Regulating Governor

- Steam Strainer

- Over speed trip

Sterilizer Door

Quality of Sterilizing FFB determined the quality of well cook fruit.

Average 1 cycle of Sterilizer take about 90-110 minutes.

1 sterilizer cycle starts from :

               - Door opening

               - Cages entrance/fruit entrance

               - Sterilizing process

               - Fruit discharges after sterilizer / cages out.

- Design Pressure                             : 50psig

- Shell(Neck)                                     : 700 mm( L ) up to 900 mm(L)

                                                            15 mm thk. Boiler Plate

- Dish Head                                       : 15up to 18 mm thk.

                                                            Boiler PlateASTM SA 516 Grade 70

- Approval                                         : From DOSH Malaysia

                                                             (Dept of Safety and Health ) Malaysia

Hoist Crane

Electric Wire Rope Hoist NOVA

- Minimum headroom

- Nearly true vertical lifting

- Robust industrial version

- Powerfull hoisting and travelling motors

- Frequency inverter MicroMove for step less trolley and crane